Daily Maintenance And Precautions Of Belt Conveyors

1. Daily inspections should be conducted, and if any abnormal sounds are found, the vehicle should be stopped immediately to identify the cause.
2. Regularly check whether each supporting roller and drum rotates freely. If necessary, replace the bearings or even supporting rollers of the supporting roller or head and tail drums in a timely manner. Timely supplement and replace lubricating oil materials.
3. If problems such as tape deviation, movement, and excessive sagging occur, the cause should be promptly identified and corrected by adjusting the head and tail wheels and tensioning devices.
4. The tape should not come into contact with oily materials such as gasoline, diesel, engine oil, etc; The conveyor should not be exposed to sunlight, night dew, or rain to prevent the tape from being corroded and affecting its service life.
5. All transmission components of the belt conveyor must be equipped with safety covers.
6. To prevent materials and dust from flying, a specially designed dust cover can also be installed along the entire length of the conveyor if necessary.