How to use a plastic sealing machine

The first step is to plug in the power of the plastic sealing machine, find the power switch of the machine, and turn it on because it takes more than ten minutes to heat up.

The second step is to wrap the documents to be sealed with plastic film during the heating process of the plastic sealing machine, wait for the sealing, and then proceed with the sealing when the working power of the machine turns green.

Step three, before laminating, we can take a look at the precautions on the printer and then check the A4 paper markings on both sides of the film on the laminating machine.

Step four, align both sides of the A4 paper marked on the plastic sealing machine, keep it level with the film inlet, and wait patiently for the film to slowly enter the plastic sealing machine. Then, the sealed film will slowly come out from behind.

Step 5, we will see markings on the plastic sealing machine that are 80-110mm ic/120-175 mic, which are adjusted based on the thickness of the plastic sealing film used. We need to pay attention to this.

 

Matters Needing Attention

During the sealing process of the plastic sealing machine, we should not rush to pull it, but wait for it to slowly come out on its own